DUAL CUBE Driver Ver.1.0.0 for macOS 10.15


To use the DUAL CUBE driver, select the dedicated USB driver (Vendor) mode on the DUAL CUBE LX / DUAL CUBE BASS LX using the following procedure:
  1. Turn off the power.
  2. DUAL CUBE LX: Set the [AMP TYPE] knob to [ACOUSTIC SIM].
    DUAL CUBE BASS LX: Set the [AMP TYPE] knob to [SUPER FLAT].
  3. Turn on the power while holding the [MEMORY] button.

INSTALLING THE DRIVER
The downloaded file is an archive file. Information on how to use it is inside the Readme.htm file created after expanding the downloaded file.
Before installing the driver, be sure to read the Readme.htm* file.
* The information in Readme.htm might differ from what is on this page. For the most up-to-date information, refer to this page.

The actual screen display and installation procedure are subject to change. Refer to the latest installation procedure for your version of macOS.
 

SYSTEM REQUIREMENTS
This driver has the following requirements.

* Please also check the System requirements for the audio/MIDI application and the operating system you're using.
 
Operating System
macOS 10.15
Computer
Apple Mac series computer with on-board USB
 
* Even if connected to a USB 3.0 port, the performance of the product will not change.
* Mac computers running Microsoft Windows are not supported.
* Apple and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
* macOS is a trademark of Apple Inc.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.